Coriolis effect

     From Wikipedia, the free encyclopedia.

In physics, the Coriolis effect is an inertial force first described by Gaspard-Gustave Coriolis, a French scientist, in 1835. When the equations of motion are formulated in a rotating coordinate system a term arises which looks like a force, called the Coriolis force. See also centrifugal force.

In changing from an essentially inertial coordinate system (such as the "frame of the fixed stars") to a rotating frame of reference (such as Earth), a term appears in the equation of motion described by the formula:

,

where bold indicates vector quantities, m is mass, v is the velocity and Ω is the angular velocity of the coordinate system. Note that this equation ignores the second-order term in Ω, which in geophysical terms is small, and can anyway be absorbed into the gravitational potential term.

This equation means that the force will be proportional to the velocity of the object and the rotation of the coordinate system. The force will be in a direction perpendicular to the velocity (and thus does no work). If an object is travelling on earth in the northern hemisphere, the Coriolis force will deflect the object to the right. In the southern hemisphere the reverse is true, while at the equator the horizontal component of the force is zero for horizontal motions. For instance, the effect breaks up the atmospheric circulation from the tropics to the polar regions into a series of cells in which the surface winds have a prevailing eastward or westward component.

The Coriolis force plays a strong role in weather patterns, where it affects prevailing winds and the rotation of storms, as well as in the direction of ocean currents. Above the atmospheric boundary layer, friction plays a relatively minor role, as air parcels move mostly parallel to each other. Here, an approximate balance between pressure gradient force and Coriolis force exists, causing the geostrophic wind, which is the wind effected by these two forces only, to blow along isobars (along lines of constant geopotential height, to be precise). Thus a northern hemispheric low pressure system rotates in a counterclockwise direction, while northern hemispheric high pressure systemss or cyclones on the southern hemisphere rotate in a clockwise manner.

The Coriolis effect must also be considered in astronomy, and stellar dynamics, where it affects phenomena such as the rotational direction of sunspots. The flight paths of airplaness, artillery shells, and missiles must account for the Coriolis effect or risk being off course by significant amounts (see external ballistics).

Although the Coriolis force is relatively small and does not have an observable influence on small systems such as the whirlpool of a draining bathtub, toilet or sink [1] [1], the Coriolis effect can have a visible effect over large amounts of time and has been observed to cause uneven wear on railroad tracks and cause rivers to dig their beds deeper on one side.

A practical application of the Coriolis force is the mass flow meter, an instrument that measures the mass flow rate of a fluid through a tube. The instrument was introduced in 1977 by Micro Motion Inc. Simple flow meters measure volume flow rate, which is proportional to mass flow rate only when the density of the fluid is constant. If the fluid has varying density, or contains bubbles, then the volume flow rate multiplied by the density is not an accurate measure of the mass flow rate. The Coriolis mass flow meter works by applying a vibrating force to a curved tube through which the fluid passes. The Coriolis effect creates a force on the tube perpendicular to both the direction of vibration and the direction of flow. This force is measured to give the mass flow rate. Coriolis flow meters can also be used with non-Newtonian fluids, which tend to give inaccurate results with volume flow meters. The same instrument can be used to measure the density of the fluid, since this affects the resonant frequency of the vibrating tube. A further advantage of this instrument is that the fluid is contained in a smooth tube, with no moving parts that would need to be cleaned and maintained, and that would impede the flow. EDN Access 2003-06-30

Is the Coriolis force "fictitious"?

It is common to see the Coriolis force described as "making it look like a force is acting upon the object, but actually there is no real force acting on the object". This prompts the question, "what is a real force"? From the viewpoint of General relativity, all coordinate systems are equivalent in describing physical processes, but in changing from one system to another things that look like forces will arise. For example, at the surface of Earth it is possible to (locally) remove the gravitational force by changing to a coordinate system accelerating towards the centre of Earth. But no-one would call gravity "fictitious".